Hydraulic Twin Bale Feeder
The Elsworth Hydraulic Twin Bale Feeder comes in two sizes, 4’ and 5’ models.
- The 4’ model will feed any 4’ wide bale, 4’ high to 6’ high.
- The twin bale feeder can feed out silage through to tight oaten rolls.
- The twin bale feeder has a heavy duty construction from Australian steel.
- The chassis is made from 125mm x 75mm x 6mm RHS.
- A flat floor enables tight silage/oaten rolls to easily unroll and start feeding out.
- The deep 20” chamber prevents rolls from coming out of the feeder when feeding on hilly terrain.
- Feeder shafts are 11/2 shaft with heavy duty 12mm sprockets.
- Feed bars are made from 50mm x 50mm x 8mm angle iron with heavy duty 12mm pins to tear
- out the hay.
- The hydraulic motor is a high quality motor.
- Two bales can be carried, one in the chamber and one on the hinging spears.
- The axles are three tonne capacity with slimline landcruiser hubs.
- Feeder chain is 3” long link 6000lb conveyor chain made in Australia, bars are bolted on not welded to chain.
- The Standard twin bale feeder comes with dual hoses, but an isolator valve is available at no extra charge for tractors with single remotes.
- Available powerpacks – 13hp Honda
Specifications
Weight: 1 tonne plus
Drive: Heavy duty hydraulic motor
Wheel Equipment: 3 tonne axle Landcruiser sunraysia rims
Transport Width: Under 8ft
Chassis: 125mm x 75mm x 6mm RHS
Example Price
4′ Twin Bale Feeder $13,000 + gst Smeaton
Trailing feeders now have:
- Rear tail lights
- Hydraulic hose holders
- Instruction holder
- Jack holder
- Mudguards
Optionals:
- Sliding door